Operation
31
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging
function.
for details.
You can operate your display software program (on a connected PC) which responds to page
up/down commands (like Microsoft PowerPoint) by pressing PAGE UP/PAGE DOWN on
the remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft® Windows®98 operating system.
Windows®XP or higher operating systems are recommended.
Freezing the image
Press
Freeze on the remote control to freeze the image. The word “FREEZE” will display
in the upper left corner of the screen. To release the function, press any key on the projector
or remote control.
If your remote control has the following keys, please note that they cannot be pressed to
release the function: LASER, #1, #4, PAGE UP/PAGE DOWN.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen onscreen.
Hiding the image
In order to draw the audience's full attention to the presenter, you can use ECO BLANK/
BLANK on the projector or remote control to hide the screen image. When this function is
activated with an audio input connected, the audio can still be heard.
You can set the blank time in the
SYSTEM SETUP: Basic > Operation Settings > Blank
Timer
menu
to let the projector return the image automatically after a period of time when
there is no action taken on the blank screen. The length of time can be set from 5 to 30
minutes in 5-minute increments.
If the preset time spans are not suitable for your presentation, select Disable.
No matter
Blank Timer
is activated or not, you can press most of the keys on the projector
or remote control to restore the picture.
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from
being changed accidentally (by children, for example). When the Panel Key Lock is on, no
control keys on the projector will operate except
POWER.
1.
Go to the SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by pressing
/
on the projector or remote control. A confirmation message displays.
2.
Highlight Yes and press MODE/ENTER to confirm.
To release panel key lock, use the remote control to enter the
SYSTEM SETUP: Basic >
Panel Key Lock menu and press
/
to select
Off
.
•
Keys on the remote control are still active when panel key lock is enabled.
•
If you press
POWER to turn off the projector without disabling panel key lock, the
projector will still be in locked status the next time it is turned on.
