Introduction
13
Remote control
1.
ON
Turns on the projector. See
"Starting up the
projector" on page 30
for details.
2.
COMPUTER-1/COMPUTER-2
Displays RGB (PC)/Component video
(YPbPr/ YCbCr) signal.
3.
S-VIDEO
Displays S-video signal.
4.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
"Using
the menus" on page 33
for details.
5.
BLANK
Used to hide the screen picture. See
"Hiding
the image" on page 44
for details.
6.
Keystone/Arrow keys (
/
Up,
/
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 32
for
details.
7.
MODE/ENTER
Selects an available picture setup
mode. See
"Selecting a picture mode" on
page 39
for details.
Activates the selected On-Screen
Display (OSD) menu item. See
"Using
the menus" on page 33
for details.
8.
Left/
Starts the FAQ function. See
"Utilizing
FAQ function" on page 44
for details.
9.
ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size. See
"Magnifying and
searching for details" on page 37
for
details.
10.
PAGE UP/PAGE DOWN
Page up/down arrows when connected
through USB to a PC. See
"Remote
paging operations" on page 43
for details.
11.
FREEZE
Freezes the projected image. See
"Freezing the image" on page 44
for
details.
12.
Network Setting
Enables Network Settings OSD menu.
13.
TEST
Displays the test pattern. See
"Test
Pattern" on page 72
for details.
14.
OFF
Turns off the projector. See
"Shutting
down the projector" on page 69
for
details.
15.
VIDEO
Displays vidoe signal.
16.
NETWORK
Enables the network mode.
17.
SOURCE
Displays the source selection bar. See
"Switching input signal" on page 36
for
details.
1
19
6
7
6
21
17
4
18
9
24
22
20
15
2
3
5
10
11
25
8
12
13
14
16
23
