Operation
48
Function
(Default setting/value)
Description
Picture Mode
(
Presentation
)
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
"Selecting a
picture mode" on page 32
for details.
Reference
Mode
(
Dynamic
)
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
"Setting the User 1/User 2 mode" on page 32
for
details.
Brightness
(50)
Adjusts the brightness of the image. See
"Adjusting Brightness" on page
33
for details.
Contrast
(0)
Adjusts the degree of difference between dark and light in the image.
See
"Adjusting Contrast" on page 33
for details.
Color
(0)
Adjusts the color saturation level -- the amount of each color in a video
image. See
"Adjusting Color" on page 33
for details.
This function is only available when a VIDEO or S-VIDEO signal
is selected and the system format is NTSC or PAL.
Tint
(0)
Adjusts the red and green color tones of the image. See
"Adjusting Tint"
on page 33
for details.
This function is only available when a VIDEO or S-VIDEO signal
is selected and the system format is NTSC.
Sharpness
(15)
Adjusts the image to make it look sharper or softer. See
"Adjusting
Sharpness" on page 33
for details.
This function is only available when a VIDEO or S-VIDEO signal
is selected and the system format is NTSC or PAL.
Brilliant Color
(
On
)
See
"Adjusting Brilliant Color" on page 34
for details.
Color
Temperature
(depends on the
selected input
signal)
There are four color temperature settings available. See
"Selecting a
color temperature" on page 34
for details.
3D Color
Management
See
"3D Color Management" on page 34
for details.
Save Settings
Saves the settings made for User 1
User 1
User 1
User 1 or User 2
User 2
User 2
User 2 mode.
2. PICTUR
E
menu
