background image

24” LCD Color Monitor                                      BenQ M2400HD

 

7                                                                                                                    

 high resolution (1920x1080)   

 presentation of up to 16.7 million colours (in conjunction with an appropriate graphics card)   

 automatic scanning of horizontal frequencies from 30 to 83 kHz and refresh rates (vertical frequencies) from 50 to   

76 Hz (absolutely flicker-free)   

 digital screen controller with microprocessor for storing 21 different display modes   

 freely adjustable colour alignment for matching the screen colours to the colours of various input and output   

devices  

 convenient operation via integrated OSD (On-Screen-display) menu   

 VESA-DDC compatibility   

 plug&play capability   

 power management for reducing power consumption when the computer is not in use   

 compliance with the recommendations in accordance with TCO’03   

This operating manual contains important information you require to start up and run your LCD monitor.   

This specification defines the requirements for the 24” MICROPROCESSOR based Multi-mode supported high 

resolution color LCD monitor. This monitor can be directly connected to general 15-pin D-sub VGA connector, 24-pin 

DVI connector and 19-pin HDMI connector, also supports VESA DPMS power management and plug & play function. 

There is a build-in stereo audio amplifier with OSD control to drive a pair of speakers. 

Additional information   

Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. For the best 

display performance, please set the display resolution to 1920x1080 pixels with an aspect ratio of 16:10. This is 

called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower resolutions are displayed on a 

full screen through an interpolation circuit. Image blurring across pixel boundaries can occur with the interpolated 

resolution depending upon the image type and its initial resolution. 

4. Related service information 

This Service Manual contains general information. There are 2 levels of service: 

Level 1: Cosmetic / Appearance / Alignment Service   

http://www.wjel.net

Содержание M2400HD - 24" LCD Monitor













































































Отзывы: