English
34
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only display one
full screen at a time.
Be sure the
Quick Auto Search
function in the
SOURCE
menu is
On
(which is the default of this
projector) if you want the projector to automatically search for the signals.
You can also manually cycle through the available input signals.
1. Press
SOURCE
on the projector or remote control. Displays the source selection bar.
2. Press ▲/▼ until your desired signal is selected and press
MODE/ENTER
.
Once detected, the selected source information will display on the screen for seconds. If there is
multiple equipment connected to the projector, repeat steps 1-2 to search for another signal.
y
The brightness level of the projected image will change accordingly when you
switch between different input signals. Data (graphic) “PC” presentations using
mostly static images are generally brighter than “Video” using mostly moving
images (movies).
y
For best display picture results, you should select and use an input signal which
outputs at this resolution. Any other resolutions will be scaled by the projector
depending upon the 'aspect ratio' setting, which may cause some image distortion
or loss of picture clarity. See
“Selecting the aspect ratio” on page
35
for details.
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector's HDMI input and
the projected picture displays wrong colors, please change the color space.
The operation is as follows:
1. Press
MENU/EXIT
and then press ◄/► until the
SOURCE
menu is highlighted.
2.
Press ▼to highlight
Color Space Conversion
and press ◄/► to select the setting.
This function is only available when the HDMI input port is in use.
Содержание LH770
Страница 1: ...LX770 LH770 Digital Projector User Manual V1 00...
Страница 26: ...English 26 Connection with LAN Ethernet...
