Upgrading or replacing the memory
62
6. Release the existing memory module by pushing aside the
memory holders, and remove the memory.
7. Align the memory module with the slot, and then insert it.
When inserting, pay attention to the direction of the
memory module.
8. Replace the memory cover.
9. Use a screwdriver to secure the cover with the screws.
Handle the memory module by its edge and avoid touching the
contacts.
• Gently push the free edge downwards until the module locks
into place.
• If the memory module is not installed properly, your Joybook
may not boot properly.
JB_S35_EN.book Page 62 Monday, September 21, 2009 2:25 PM
