background image

  27

  Menu operation

DISPLAY menu

  

INSTALLATION menu

Image 
Position

Displays the position adjustment page. To move the projected image, use the 
directional arrow keys. This function is only available when a PC signal (analog RGB) 
is selected.

Overscan 
Adjustment

Conceals the poor picture quality in the four edges. 
The greater the value, the more portion of the picture is concealed while the 
screen remains filled and geometrically accurate. Setting 0 means the picture is 
100% displayed.

PC Tuning

• 

H. Size

: Adjusts the horizontal width of the image.

• 

Phase

Adjusts the clock phase to reduce image 

distortion.

• 

Auto

: Adjusts the phase and frequency automatically.

These functions are only available when the PC signal is selected.

Projector 
Position

The projector can be installed on a ceiling or behind a screen, or with one or more 
mirrors. See 

Choosing a location on page 11

.

Test Pattern

Adjusts the image size and focus and check that the 
projected image is free from distortion.

Aspect Ratio

There are several options to set the image's aspect ratio depending on your input 
signal source.
• 

Auto

: Scales an image proportionally to fit the 

projector's native resolution in its horizontal or vertical 
width.

• 

4:3

: Scales an image so that it is displayed in the center 

of the screen with a 4:3 aspect ratio.

• 

16:9

: Scales an image so that it is displayed in the 

center of the screen with a 16:9 aspect ratio.

• 

2.35:1

: Scales an image so that it is displayed in the 

center of the screen with a 2.35:1 aspect ratio.

15:9 picture

4:3 picture

16:9 picture

16:9 picture

Содержание HT9050








































Отзывы: