Introduction
14
Infra-Red (IR) remote control sensor is located on the front of the projector. The
remote control must be held at an angle within 30 degrees perpendicular to the
projector's IR remote control sensor to function correctly. The distance between the
remote control and the sensor should not exceed
8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor
on the projector that might obstruct the infra-red beam.
18. CONTRAST
Displays the contrast setting bar.
19. AUTO
Automatically determines the best
picture timings for the displayed
image. See
for details.
20. LIGHT MODE
Displays the lamp power mode
selection bar (Normal/Economic/
SmartEco).
21. COLOR MANAGE
Displays the color management setting
bar.
22. ECO BLANK
Press the
ECO BLANK
button to turn
off the image for a period of time with
70% lamp power saving. Press again to
restore the image. See
for details.
23. SHARP
Displays the sharpness setting bar.
• Operating the projector from
the front
Approx. 3
0°
