25
Operation
Likewise, when you wish to switch from the
Advanced
OSD menu to the
Basic
OSD menu, follow
the instructions below:
1. Go to
System
>
Menu Settings
>
Menu Type
and press
OK
.
2. Press / to select
Basic
. Your projector will switch to the
Basic
OSD menu.
Securing the projector
Utilizing the password function
Setting a password
1. Go to
Advanced
menu
- System
>
Security Settings
. Press
OK
. The
Security Settings
page
appears.
2. Highlight
Change Password
and press
OK
.
3. The four arrow keys ( ,
,
,
) respectively represent
4 digits (1, 2, 3, 4). According to the password you
desire to set, press the arrow keys to enter six digits for
the password.
4. Confirm the new password by re-entering the new
password.
5. To activate the
Power On Lock
function, go to
System
>
Security Settings
>
Power On Lock
,
press
OK
and / to select
On
. Input the password
again.
If you forget the password
If you enter the wrong password, the password error message
will appear, and the
Input Password
message follows. If you
absolutely do not remember the password, you can use the
password recall procedure. See
If you enter an incorrect password 5 times in succession, the
projector will automatically shut down in a short time.
Entering the password recall procedure
1. Press and hold
OK
for 3 seconds. The projector will
display a coded number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode
the number. You may be required to provide proof of
purchase documentation to verify that you are an
authorized user of the projector.
• The digits being input will display as asterisks on-screen. Make a note of your selected password and keep it in a
safe place in advance or right after the password is entered so that it is available to you should you ever forget it.
• Once a password has been set and the
Power On Lock
is activated, the projector cannot be used unless the
correct password is entered every time the projector is started.
Input New Password
Return
Password Error
Please try again.
Please write down the recall code, and
contact BenQ Customer Center.
Recall Code:
CJ-2014-541638
Recall Password
Return
