BenQ FP567, Руководство пользователя

Страница: 40 / 43

BenQ LCD Color Monitor User's Guide
English 39
Troubleshooting
Frequently Asked Questions (FAQ)
✓
The image is blurred:
☞
Read the chapter, "Installation/Adjustment" and select the correct resolution, refresh rate
and make adjustments based on these instructions.
☞
Do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the
image working on the description in the chapter, "Installation/Adjustment." It is normal
for blurring to occur due to conduction losses in extension cables. You can minimize
these losses by using an extension cable with better conduction quality or with a built-
in booster.
☞
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the chapter "Installation/Adjustment." Select the native resolution.
✓
Pixel errors can be seen:
☞
One of several pixels are permanently black, one or more pixels are permanently white,
one or more pixels are permanently red, green, blue or another colour.
Read the chapter "Pixel Error Rates."
✓
The image has a faulty colour appearance:
☞
It has a yellow, blue or pink appearance.
On the monitor press the “Enter” button and
use the
“<”or “>”keys to move to the
“information” menu. Press “Enter” to “Recall” the preset mode. If the image is still not
correct and the OSD also has a fault colour appearance, then one of the three primary
colours is missing in the signal input. Now check the VGA cable contacts. If any pins
are bent or broken off, then contact your dealer or read the chapter, Additional Help,
Repairs & Service.
✓
No image can be seen:
☞
Is the prompt on the display illuminated in green?
If the LED is illuminated in green, then press the “Exit” button on the monitor to
access the On Screen Display. If the message “Not supported Mode” appears, read the
chapter "Installation/Adjustment."
☞
Is the prompt on the display illuminated in orange?
If the LED is illuminated in orange, then the power management mode is active. Press
a button on the computer keyboard or move the mouse. If that does not help, then
check the VGA cable contacts. If any pins are bent or broken off, then contact your
dealer or read the chapter, Additional Help, Repairs & Service.