32 Menu
operation
Security
Settings
Panel Key Lock
With the control keys on the projector locked, you can prevent your projector
settings from being changed accidentally (by children, for example). When
Panel
Key Lock
is on, no control keys on the projector will operate except
POWER
.
To release panel key lock, press and hold (the right key) for 3 seconds on the
projector or turn this function off using the remote control.
If you turn off the projector without disabling panel key lock, the projector will still be in locked
status the next time it is turned on.
Change Password
See
Utilizing the password function on page 21
Power On Lock
See
Utilizing the password function on page 21
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can connect
the projector using a suitable RS-232 cable and update or download the projector’s
firmware. This function is intended for qualified service personnel.
HDMI
Equalizer
Adjusts the equalizer gain settings for an HDMI signal. The higher the setting, the
stronger the gain value. If there are more than one HDMI port on the projector,
select the HDMI port first before adjusting the value.
PointWrite
Touch Unit
Disables or enables "Type A connector" 5V power output for PointWrite Touch
Module. This function is only available when a PC signal (analog RGB or HDMI) is
selected
Reset Settings
Returns all of the adjustments you’ve made for the
Settings
menu to the factory
preset values.
