Using the Remote Control
15
Eng
lish
Using the Remote Control
Power on, Power off and Standby
Turning on the display
1. After plugging the display's power cord into a wall outlet, the display will turn on and enter
standby mode automatically. The power indicator will light up red.
2. Press the Power button on the display, or press the
(Power) button on the remote
control. The display will turn on. (The power indicator changes to green.)
Turning off the display
Press the Power button on the display, or the
(Power) button on the remote control again,
and the display will go into standby mode. (The power indicator will turn red.)
Switching Inputs
1. Turn on all connected equipment or devices.
2. Press the INPUT button on your display, or press the
(Input) button on your remote
control to display the current selected input.
3. Press the button repeatedly until your desired input is displayed. The sequence is as follows:
TV -> AV1 -> AV1-RGB -> AV2 -> AV2-S->AV3->AV3-S->AV4->AV4-S->Component 1->
Component 2->PC->DVI->TV...
AV3-S or AV4-S will appear only when the S-Video input of AV3 or AV4 is connected.
Adjusting Volume
Adjusting the volume
1. Press the Volume button on your display or press the
+ button on your remote control
to increase volume. The volume indicator will increase in length as volume rises.
2. Press the Volume button on your display, or press the
- button on your remote control
to decrease volume. The volume indicator will decrease in length as volume falls.
Mute setting
1. Press the
(Mute) button on your remote control to temporarily cut off the sound.
2. Press the
(Mute) button once more, or press the Volume / or Power button on your
display to restore the sound level.
TV sound mode selection
Press the
(TV sound mode selection) button on your remote control to select "Sound 1",
"Sound 2", "Sound 3", "Auto", "Nicam", "Stereo" or "Mono" systems (the items available will
depend on the TV sound system being received).
Changing Channels
Change Channels Using the Channel selection buttons
• To select a single-digit channel, press the corresponding channel selection button on the
remote control. For example, to select channel 8, press the
channel selection button on
the remote control.
• To select a double-digit channel, press the Channel entry button on the remote control, and
then enter the channel number using the channel selection buttons. For example, to select
Downloaded From TV-Manual.com Manuals
