background image

Copyright

Copyright 2004 by BENQ Corporation. All rights reserved. No part of this publication may be 

reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or 

computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chem-

ical, manual or otherwise, without the prior written permission of this company.

Disclaimer

BENQ Corporation makes no representations or warranties, either expressed or implied, with 

respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness 

for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication 

and to make changes from time to time in the contents hereof without obligation of this company 

to notify any person of such revision or changes.
*Windows, Internet Explorer and Outlook Express are trademarks of Microsoft Corporation. Oth-

ers are copyrights of their respective companies or organizations.

Taking care of your camera

•  Do not use your camera in the following environmental range: temperature below 0°C or above 

40°C.

• Do not use or store your camera in the environments listed below: 

– Direct sunlight

– High and dusty places

– Next to an air conditioner, electric heater or other heat sources

– In a closed car that is under direct sunlight

–  Unstable locations

• If your camera becomes wet, wipe it with a dry cloth as soon as possible.
• Salt or seawater may cause severe camera damage.
• Do not use organic solvents such as alcohol, etc., to clean your camera.
• If the lens or viewfinder is dirty, use a lens brush or soft cloth to clean the lens. Do not touch the 

lens with your fingers.

• To prevent electric shock, do not attempt to disassemble or repair your camera by yourself.
• Water may cause a fire or electric shock. Therefore, store your camera in a dry place.
• Do not use your camera outdoors when it is raining or snowing.
• Do not use your camera in or near water.
• If a foreign substance or water gets in your camera, please turn the power off immediately and dis-

connect the batteries and the power adapter. Remove the foreign substance or water, and send it 

to the maintenance center.

• Transfer the data to the computer as soon as possible to avoid losing your images or video clips.

Содержание DC E43





























Отзывы: