BenQ DC 2300 User’s Manual
6
3. U
SING
THE
DC 2300
The functions of DC 2300 are mainly composed of four modes: Recording mode, Playback
mode, Video Mode, and Setup Mode. In this chapter, we will introduce the functions of DC
2300 according to these four modes.
3.1. Working Mode
3.1.1. Recording Mode
Please set the Mode Dial at Recording Mode (
) before setting up
the below functions.
I. Set Up Focus Range
Before you take pictures, please make sure you set the Focus
Switch at the correct focus range or the image may not be clear.
a. Macro (
): 18~25cm.
b. Portrait (
): 80cm~1.3m.
c. Normal(
): 1.3m~infinity.
If the Focus Switch is set at (
) or (
), (
/
) will show on TFT LCD
Monitor to remind you that the focus is not set at Normal focus range.
II. Turn On or Turn Off the LCD Display (Preset at On status)
The TFT LCD Monitor is automatically turned on when the camera is switched
on. To turn off the TFT LCD Monitor please press LCD Button. To turn on the
TFT LCD Monitor please press LCD Button again.
III. Set Up Flash Mode (Preset at Auto Flash mode)
There are five flash modes as below:
a. Auto flash(
): The camera will judge the necessity of using the flash. If the
environment is too dark the flash will fire automatically.
b. Auto flash with red-eye reduction(
): The camera will judge the necessity of
using the flash and reduce the chance of red-eye reduction.
c. Slow sync (
): The shutter speed will become slow in order to catch more
light to make good images in low light circumstances. Under this mode, it is
suggested to use a tripod to make sure the camera is held still while taking the
picture.
d. Fill-in-flash(
): The flash will fire in any light circumstances.
e. Flash off (
): The flash will not fire in any light circumstances.
Содержание DC 2300
Страница 1: ...DC 2300 User s Manual ...