background image

Important safety instructions

6

Safety Instructions (Continued)

17. Do not step on the projector or place

any objects upon it. Besides probable
physical damage to the projector, doing
so may result in accidents and possible
injury.

18. Do not place liquids near or on the

projector. Liquids spilled into the
projector may cause it to fail. If the
projector does become wet,
disconnect it from the power supply's
power outlet and call BenQ to have
the projector serviced.

19. This product is capable of displaying

inverted images for ceiling mount
installation.

Use only BenQ's Ceiling Mount Kit for 

mounting the projector and ensure it is 

securely installed.

20. This apparatus must be earthed.

Ceiling mounting the projector

We want you to have a pleasant 
experience using your BenQ projector, 
so we need to bring this safety matter 
to your attention to prevent possible 
damage to person and property.
If you intend to mount your projector 
on the ceiling, we strongly recommend 
that you use a proper fitting BenQ 
projector ceiling mount kit and that 
you ensure it is securely and safely 
installed.
If you use a non-BenQ brand projector 
ceiling mount kit, there is a safety risk 
that the projector may fall from the 
ceiling due to an improper attachment 
through the use of the wrong gauge or 
length screws.
You can purchase a BenQ projector 
ceiling mount kit from the place you 
purchased your BenQ projector. BenQ 
recommends that you also purchase a 
separate Kensington lock compatible 
security cable and attach it securely to 
both the Kensington lock slot on the 
projector and the base of the ceiling 
mount bracket. This will perform the 
secondary role of restraining the 
projector should its attachment to the 
mounting bracket become loose.

Hg - Lamp contains mercury. Manage in 

accordance with local disposal laws. See 

www.lamprecycle.org.

Содержание BH3002





























































Отзывы: