BenQ AR15 D Genie, Руководство пользователя

Страница: 3 / 56

2 English
For the AR15_D Model with a Table Clamp (Available Separately)
1. Place the table clamp onto the
edge of the table surface [Figure
(1)] and then secure the table
clamp by tightening the clamp
screw [Figure (2)]. The
maximum clampable thickness of
the table clamp is 6 cm.
2. Insert the shaft on the table clamp
all the way into the hole on the
end of the lamp arm [Figure
(3)], and then secure it by
tightening the screw using the
supplied Hex L-key [Figure
(4)].
Be sure to tighten the screw to
secure the table clamp to the lamp
arm. Otherwise the table clamp will detach from the lamp arm and result in damages or
personal injuries if the lamp is unwittingly moved by grasping the lamp arm.
3. Connect the power cord to the power adapter [Figure (5)] and plug it into a power outlet
[Figure (6)].
For the AR15_D Hop Model
1. Secure the six rubber cushions on
the bottom side (the side with six
screw holes) of the stand base
using the six screws provided
[Figure (1)].
2. Unscrew the hexagon bolt on the
end of the stand pillar by turning it
counterclockwise [Figure (2)].
3. Temporarily remove the hexagon
bolt and washer from the stand
pillar [Figure (3)].
4. Secure the stand base to the
stand pillar using the hexagon bolt
and washer removed in step 4
[Figure (4)]. Pay attention to
the correct orientation of the
stand pillar.
5. Tighten the hexagon bolt using
the wrench provided [Figure
(5)].
6. Insert the shaft on the stand pillar
all the way into the hole on the
end of the lamp arm [Figure
(6)] and then secure it by
tightening the screw using the
supplied Hex L-key [Figure
(7)].
7. Place the power cord in the clamp
on the stand pillar [Figure
(8)]. Connect the power cord
to the power adapter [Figure
(9)] and plug it into a power
outlet [Figure (10)].