BenQ 9H.JL877.13E, Руководство пользователя

Страница: 19 / 56

19 Operation
4. If you are prompted for a password, press the arrow keys to enter a 6-digit password. See Utilizing
the password function on page 21 .
5. Switch all of the connected equipment on.
6. The projector will search for input signals. The current input signal being scanned appears. If the
projector does not detect a valid signal, the message “No Signal” will continue displaying until an
input signal is found.
You can also press
SOURCE to select your desired input signal. See Switching input signal on page
23 .
Step 4:
Specify
Auto Source .
Select On if you want the projector to
always search for available signals
automatically when the projector is turned
on.
Step 5:
Specify
Menu Type .
For more information about menu types,
see
Using the menus .
Now you’ve completed the initial setup.
• Please use the original accessories (e.g. power cord) to avoid possible dangers such as electric shock and fire.
• If the projector is still hot from previous activity, it will run the cooling fan for approximately 90 seconds before
energizing the lamp.
• The Setup Wizard screenshots are for reference only and may differ from the actual design.
• If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message
“Out of Range” displayed on the background screen. Please change to an input signal which is compatible
with the projector's resolution or set the input signal to a lower setting. See Timing chart on page 50 .
• If no signal is detected for 3 minutes, the projector automatically enters saving mode.
• If “Reset All Settings” is selected, setup wizard will appear after reboot, and Auto Source will be reset to default
value.