119
Settings
right page (119)
of ONYX SL91 FCC am (11.09.2006, 12:00)
Ben
Q
2006, Z:\SL
91_ONYX\ou
tput
\FUG\ON
YX_FCC_am_060911_t
e\FM\
ONYX_Security.fm
Te
m
p
lat
e: Minion
, 140x105 mm, Ve
rsi
o
n 2.0;
VAR Language: am;
VAR issue
date: 060711
Settings
Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
If activated, the keypad is locked auto-
matically if no key has been pressed for
one minute in standby mode. This pre-
vents the phone from being used acci-
dentally. However, you can still be called
and you can still make an
emergency call.
C
Press to switch function
On
/
Off
.
Only protect. SIM
b
(PIN2 or phone-code protected)
Dialling options are restricted to the
SIM protected numbers in the contacts.
If only area codes are entered, relevant
numbers can be added to these
manually before dialling.
If the SIM card does not support PIN2
input,
all
the contacts can be protected
with the phone code.
On
/
Off
Activate/deactivate and
confirm with
C
.
PIN codes
b
See page 29:
PIN control
,
Change PIN
,
Change PIN2
,
Change phonecde
This SIM only
b
(PIN 2 or phone-code protected)
The phone can be linked to a SIM card
when the phone code is entered. Unless
the phone code is known the phone will
not operate with a
different
SIM card.
If the phone is to be used with a different
SIM card, enter the phone code when
requested.
On
/
Off
Activate/deactivate and
confirm with
C
.
Barrings
b
Barring restricts the use of your SIM
card (not supported by all service pro-
viders). You need a 4-digit network
password for network barring. Your
service provider will supply you with
this password. You may need to register
separately for each barring.
Activate/deactivate barrings
I
Select call type described
below and confirm
with
C
.
The keypad can also be directly locked and
unlocked in standby mode. In each case:
#
Press and
hold
.
