Bennett SITE MASTER EMV, Сборка

Страница: 10 / 28

Bennett Site Master Instruction Manual Installation
6
DISPENSER OVERVIEW
EXTERIOR LAYOUT (ALP HA NUMERIC)
INTERIOR LAYOUT
120VAC is installed in the head of the unit and terminated on the terminal strip as shown in Figure 1.2 . Neutral and Hot are labeled on
the terminal strip. The Power Supply is factory wired to the terminal strip and converts the 120VAC into the +12VDC and +24VDC needed
for the module to operate.
The payment module receives power from the Power Supply through the J5 connector on the SBC2 CPU Board and uses a +12 VDC
voltage source and +24 VDC voltage source. Both sources are received through the J5 connector.
Figure 0.1 - Exterior Layout with EMV & Alpha
Key Locks
Receipt Printer
EMV PIN Pad
7” Display
NFC Reader
Power Supply
Power Toggle Switch
SBC2 CPU Board
Terminal Strip
Figure 0.2 - Interior Layout with EMV & Alpha