550W BLENDER ASSEMBLY & OPERATION
4
• Before first use, wash all removable parts and accessories in warm,
soapy water and dry before assembling the unit
• DO NOT IMMERSE THE BLENDER BASE UNIT OR POWER CORD IN
WATER
• Do not connect the unit to electrical power until fully assembled
Place the Jug onto the Base Unit.
Lock into place by turning the
Jug to align the arrow on the Jug
with the arrow on the Base Unit.
NOTE
: The Blender has a safety lock that will prevent operation unless
the Jug is properly connected to the Base.
CAUTION:
The blender is ON when connected to the electrical power.
•
DANGER:
KEEP HANDS, HAIR, CLOTHING & UTENSILS OUT OF THE
JUG WHILE IN USE TO REDUCE THE RISK OF SEVERE INJURY OR
DAMAGE TO THE APPLIANCE
•
IMPORTANT OPERATING NOTE:
Do not operate for the blender for longer than1 minute at a time. Then
allow the blender to cool down for 5 minutes. This is 1 cycle. DO NOT
operate the blender for more than 5 cycles in a row. After 5 cycles,
allow the motor to cool down for 2 hours before operating again