Bennett & Ross TT-1012 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 20

Bennett & Ross TT-1012 Скачать руководство пользователя страница 18

TT-1012

16 Plattenspieler m. Bluetooth TT-1012 / ArtNr.: 00063199

2020-01-02

Connecting via Bluetooth

Activate Bluetooth transmitter (this will send the audio signal of the vinyl-record
to an external Bluetooth-enabled speaker)

1.Switch the Bluetooth receiver (e.g. external BT speaker) into pairing mode.

2. Turn on the turntable and switch to BTTR-ON (Bluetooth Transmitter) at the
backside of the device. The Bluetooth LED flashes now.

3. When the pairing has been successfully finished, the LED lights up constantly.

4. Switch BT at the backside to OFF and then the turntable shuts down the
Bluetooth connection

Send Bluetooth-signals (e.g. songs from a smartphone / tablet etc.) to the
turntable and transfer them via a cinch cable to a stereo system/HiFi-
device.

1. Connect the turntable to a HiFi- system using suitable cables.

2. Use a smartphone or other Bluetooth device to connect to the turntable with
Bluetooth function.

The Bluetooth name is TT-1012.

3. The turntable transfers your songs from your smartphone or audio device via
BT to the turntable and the connected cinch cable forwards it directly to the HiFi-
system.

«
...
16
17
18
19
20
»

Содержание TT-1012





















Отзывы:

Нет отзывов