Page | 11
BNG8000iD Owners Manual.indd
BN Products-USA
3. Check the cool air inlet for any blockage and clean the area
if needed.
4. Restart the engine after checking.
Notice: When using electrical equipment with high starting
current (like compressors and sink pumps, etc.), the overload
indicating light may flash for few seconds. But this is normal.
4.3 AC Indicator Light (GREEN)
The AC indicator light will be on while
the engine starts and has normal
output.
4.4 ECO Switch
While the ECO switch is in the “ON”
position the equipment will control the
speed according to the connected load, and
will provide improved fuel efficiencies and
low noise.
When the ECO switch is in the “OFF”position, the engine will
run at the rated speed. NOTICE: For compressors or other
heavy loads the switch needs to be set to the “OFF” position
for best results.
4.5 Ground Terminal
The ground terminal should be con-
nected to the ground wire to prevent
electric shock.
