BeneVision TMS60, Руководство оператора, Страница: 133 / 250

Monitoring with the TMS60 at the CMS Monitoring at the CMS (Version Earlier than 03.00)
TMS60 Operator’s Manual 12 - 15
12.2.3.3 QT View Menu
In the QT View menu, you can view a snapshot of the real-time wave and to verify that
the QT algorithm detects correct Q and T points.
The QT View menu displays, as shown in the following figure:
■
The current waveform and parameter values display in green.
■
The template waveform and parameter values display in yellow.
■
The Q and T points are marked with a vertical line.
■
The
∆
QTc value is equal to the current QTc value minus the template QTc value.
QTc Formula Configures the QTc formula used.
Bazett:
Fridericia:
Framingham:
Hodges :
QT Alarm Setup Configures the QT alarms.
■
For details about the QT alarms limits, See
" Factory Default Parameter Alarm Settings"
on page 12 - 3 for details.
■
For details about the QT alarms responses,
See
" Factory Default Parameter Alarm
Settings" on page 12 - 3 for details.
QT View Select to display the QT View
menu.
See "
QT View Menu
" on page 12 - 15 for details.
Options Description Settings*
* The factory default settings are in bold.
QTc QT
QTHR
60
-------------
 
 
1 2
/

=
QTc QT
QTHR
60
-------------
 
 
1 3
/

=
QTc QT 154 1
60
QTHR
-------------
–
 
 

+ =
QTc QT 1.75 QTHR 60
–
  
+ =