DC/DC Converter
Richtek
*Key components are listed by the manufacturer and are subject to change without notice
Application Diagram
..
*
The distance depends on the quality of the SDI signal from the HD camera source and also the Coax
Cable & Connector
Install Guide
:
1) Connect the SDI source (such as SDI CAM ) to the SDI IN of Transmitte r
2) Connect the SDI out of Receiver to HDTV display or SDI device like SDI converter ,SDI
DVR
3) Use the quality FC patch cord to connect FC connector of the transmitter and Receiver
and then connect to the fiber-optic cable pigtail
4) Connect the output data port of Receiver (eg. TX+ and TX-) of other control device
such as Keyboard to the RX+ and RX- of the RX.
Connect the input data port of transmitter (eg. RX+ and RX-) of other under- controlled
device s such as SDI camera to the TX+ and TX- of the TX. GND in both TX and RX should
be connected directly to user’s equipment.
5) Plug two pieces of 12V power supply into the transmitter and Receiver.
6) Power on the other devices like SDI camera and SDI DVR , HDTV monitor ect
Eye Diagram
..
SD Mode
525i59
V00150213-U(1)
VCF-FB08TX&RX
Содержание VCF-FB08TX&RX
Страница 7: ...HD Mode 720P60 V00150213 U 1 VCF FB08TX RX ...
Страница 8: ...1080P30 V00150213 U 1 VCF FB08TX RX ...