GWIR-030M
V00150909-U(1)
Wireless HD Receiver:
1. SCAN: Shor t press to wake up when product is in stand-by status
No need to press SCAN key in working status under point to point mode.
2. POWER(mini B USB):mini USB socket for power supplying by USB cable.
3. HDMI OUT :for audio and video input.
Product Installation
1. Connect the TX/RX to the soruce /display with HDMI cable / connector, connect the
TX to available USB outlet for power, connect the RX with adapter and power on the
products.
Indicators of TX&RX will flash slowly when the products are powered on.
2. When the products are powered on and indicators of TX&RX are flashing slowly, please
press code key of TX for 1 sec and then release, and both indicators will be flashing rapidly
which means the pairing process is done. (Original pack of TX and RX were paired as default
set in the factor y already and shall disregard current step. )
3. When the AV source player&displayer are powered on and the indicators of TX&RX light on
steadily, the video output is working normally.
Note: To obtain best per formance of range , please always keep the antennas sur faces of TX
and RX are facing to each other.
