manualshive.com logo in svg

Benefon Track One, Руководство пользователя

Поделиться
Скачать
Benefon Track One Скачать руководство пользователя страница 160

154      BATTERY: MAINS CHARGER    

154  

BATTERY

  

MAINS CHARGER 

The mains charger available for this phone
is quick charger CMA-70-230  with its cable
FMC-70. 

The mains charger should only be used in-
doors. Make sure that the voltage in the
country which you are staying corresponds
to the voltage (230 V) of the charger.

When charging, connect the charger
(round) end of the cable into the charger
and lock it by turning it half a turn clock-
wise. Plug the square end of the cable (with
the arrow facing up) into the left side of the
bottom connector on the phone. 

Plug the charger into a mains outlet.  Charg-
ing will start automatically.

The mains charger is usually provided with
the phone, but is also available from the as-
sortment of Benefon accessories.

Other charger types are introduced in the
chapter 

Accessories

.

CHARGING

When you start using the phone for the first
time, you should 

charge the battery first.

Please note that the battery will reach its
full capacity only after two or three charg-
ing times.  

The phone controls the charging status,
battery temperature and power supply dur-
ing the charging operation.

The phone will turn on when the charger is
connected. However, when charging a to-
tally empty battery, the phone might not
turn on immediately.  

 

The phone and the battery can be left in the
charger even for several days without any
fear of damage.

The ideal temperature range for charging is
+10°...+30°C. If charging the battery above
or below these temperatures the life of bat-
tery may be shortened. Also, the battery
may not reach full capacity.

Содержание Track One


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды