User Manual-Update 2.8.2019
- 18 -of
19
T
RANSPORT BAG
The stroller is very easy to disassemble. The front and
rear wheels can be removed and put in a special bag.
Fold the handle of the stroller. Remove the added
rucksacks (Fig.59). Insert the frame of the stroller
into the transport bag (Fig.60), which can be
fastened to the roof of the car or put in the boot, thus
protecting the stroller during transport.
FOR WHEELS, WHEEL SLEEVES
Plastic wheel covers (Fig. 61) can be used for
protection against unwanted touching of the spoked
wheels.
The rear wheel sleeve (Fig. 62) is sewn from a
washable material and serves as a protection against
the dirt on carpets (floors in the house/apartment) if
you arrive from an outdoor environment.
Warning:
In the case the
Benecykl trolley is connected to the bicycle
attach always a protective helmet to the child
complying with the requirements of EN 1078.
CLEANING THE STROLLER
To clean the stroller, use only water and normal household cleaners such as detergents and fabric care
products, soft cloths or impregnating and silicone sprays. Do not use any sharp-edged or abrasive cleaners,
nor are the use of any cleaning agents containing acids or solvents permitted.
After each use: Clean the inside of the seat.
After severe weather conditions: Perform thorough cleaning of the inner and outer seats. Treat all sliding or
movable parts with silicone spray.
59
60
61
62
