BENDIX Smartwave LF Tool, Руководство пользователя

Страница: 6 / 9

710.0089 Rev. 1.1 SmartWave LF Tool User Manual 6
For dual-wheel assemblies, position the SmartWave LF Tool approximately 2 inches (5 cm) away
from the tire’s surface positioned at the center of the outboard tire’s sidewall opposite the valve
stem. The transmission from the tool will pass through the outboard tire and provoke a data
transmission from the sensor mounted on the inboard tire.
NOTE: Dual-wheel assemblies should always be mounted with valve stems 180° opposite
each other.
5. PROGRAMMING SENSOR ID NUMBERS
5.1. SMARTWAVE
There are multiple user interfaces that can be used to program sensors into the system but a
general description is found below. For more detailed information, consult your system’s Owner’s
Manual.
1. Enter the Setup Mode for your user interface. Find and enter the “Learn Sensor” mode.
2. Select which sensor you’d like to replace.
The user interface will indicate that it is searching for a sensor. The sensor inside the tire
for the wheel position to be programmed must now be provoked to transmit its ID.
3. Turn the SmartWave LF Tool ON by pressing and holding the On/Off button for 2 seconds.
4. Press the On/Off/Mode Select Button once to toggle the tool mode to the Learn sensor
function. The LED under the head with the question mark must now be ON.