4
BW1594 © 2006 Bendix Commercial Vehicle Systems LLC All rights reserved. 7/2006 Printed in U.S.A.
Страница 1: ...sed with either 12 or 24 volt systems The stoplight switch is not a serviceable item and if found defective in either device the complete unit must be replaced The shuttle valve in the DS 2 valve is serviceable and may be replaced Both the SL 5 switch and the DS 2 valve have been tested and meet the requirements of FMVSS 121 OPERATION The stop switch mechanism is identical in the SL 5 switch and t...
Страница 2: ...INSTALLING REMOVING 1 Block vehicle wheels or hold by means other than vehicle service brakes 2 Disconnect electrical connections from terminal screws 3 SL 5 switch Remove the switch using a wrench on the hex portion of the body 4 DS 2 valve Disconnect air lines and remove the DS 2 valve INSTALLING 1 Replace the SL 5 switch or DS 2 valve in the port from which it was removed Do not install with th...
Страница 3: ...ertain all system pressure has been depleted 8 Use only genuine Bendix replacement parts components and kits Replacement hardware tubing hose fittings etc must be of equivalent size type and strength as original equipment and be designed specifically for such applications and systems 9 Components with stripped threads or damaged parts should be replaced rather than repaired Do not attempt repairs ...
Страница 4: ...4 BW1594 2006 Bendix Commercial Vehicle Systems LLC All rights reserved 7 2006 Printed in U S A ...