background image

2

The optional lever type valves housed in the auxiliary control
module consist of one or two lever type valves which may be
used to control any on/off type auxiliary devices such as a
sliding fifth wheel, inter-axle lockout, etc.

The function as the lever type valves is similar to the Bendix

®

TW-1

 control valve. One or both of the valves may be utilized

and, if required, a nonfunctional spool insert may be replaced
by a functional spool insert at any time. Port identification
for the push-pull module is shown on Fig. 6 and for the
auxiliary module on Fig. 9.

OPERATING MODE

V-1

V-2

V-3

NORMAL RUN

BUTTON IN. DELIVERY

BUTTON IN. DELIVERY TO

BUTTON OUT. UPPER

SUPPLIES BOTH SECTIONS

TRACTOR SPRING BRAKES

PORTION BLOCKS SUPPLY

OF V-3 (PP-8

 AND SV-1

AND TO PILOT SECTION

AIR FROM V-1.

VALVE).

OF PILOT VALVE (SV-1

).

LOWER PILOT VALVE

TRACTOR BRAKES

(SV-1

) HELD OPEN BY

RELEASED.

DELIVERY FROM V-2
PERMITTING V-3 DELIVERY
TO TRAILER SUPPLY LINE.
TRAILER BRAKES
RELEASED.

SYSTEM PARK

BUTTON IN. DELIVERY

BUTTON OUT. EXHAUSTS

BUTTON OUT. UPPER

(POSSIBLY AUTOMATIC IF

SUPPLIES BOTH SECTIONS

AIR FROM TRACTOR

PORTION BLOCKS SUPPLY

SUPPLY PRESSURE IS

OF V-3 (PP-8

 AND SV-1

SPRING BRAKES AND

AIR FROM V-1.

LOW.)

VALVE).

FROM PILOT SECTION OF

LOWER PILOT VALVE

PILOT VALVE (SV-1

).

(SV-1

) IN EXHAUST

TRACTOR BRAKES

POSITION EXHAUSTING AIR

APPLIED.

FROM TRAILER SUPPLY
LINE. TRAILER BRAKES
APPLIED.

TRAILER PARK

BUTTON OUT. EXHAUSTS

BUTTON IN. DELIVERY TO

BUTTON IN OR OUT. NO

(POSSIBLY AUTOMATIC IF

ALL SUPPLY AIR FROM V-3

TRACTOR SPRING BRAKES

SUPPLY AIR.

SUPPLY PRESSURE IS

(PP-8

 AND SV-1

AND PILOT SECTION

PILOT VALVE (SV-1

) IN

LOW.)

VALVE).

(SV-1

). TRACTOR BRAKES

EXHAUST POSITION

RELEASED.

VENTING TRAILER
SUPPLY LINE.
TRAILER BRAKES
APPLIED.

TRAILER RE-SUPPLY

BUTTON IN. DELIVERY

BUTTON OUT. EXHAUST

BUTTON IN. SUPPLY AIR

SUPPLIES BOTH SECTIONS

AIR FROM TRACTOR

FROM V-1 IS DELIVERED

OF V-3 (PP-8

 AND SV-1

SPRING BRAKES AND

THROUGH UPPER CAVITY

VALVE).

FROM PILOT SECTION

TO TRAILER SUPPLY LINE.

(SV-1

).

TRAILER BRAKES

TRACTOR BRAKES

RELEASED.

APPLIED.

FIGURE 2 - MODUTROL OPERATING MODES

Содержание MV-1 MODUTROL







Отзывы: