Bender RFID114, Руководство пользователя

Страница: 6 / 16

Important information
6
RFID114_D00328_00_M_XXEN/04.2018
1.4 Inspection, transport and storage
Inspect the dispatch and equipment packaging for damage, and compare the
contents of the package with the delivery documents. In the event of damage
in transit, please contact Bender immediately. The devices must only be
stored in areas where they are protected from dust, damp, and spray and drip-
ping water, and in which the specified storage temperatures can be ensured.
1.5 Disposal
Abide by the national regulations and laws governing the disposal of this de-
vice. Ask your supplier if you are not sure how to dispose of the old equip-
ment.
For more information on the disposal of Bender devices, refer to our
homepage at www.bender.de -> Service & support.
1.6 Intended use
This manual provides a description of an RFID module which may only be
used in combination with Bender charge controllers. The charge controller is
designed for use in electric vehicle (EV) charging stations, wall boxes and
street light charging points. This document should be used together with the
charge controller operating manual(s), which can be downloaded from:
www.bender.de/en/service-support/downloads
The RFID module is a separate PCB which facilitates user interaction with the
charging system and is designed in accordance with the ISO14443A/MIFARE
standard. It can be connected to the charge controller via the provided
RJ45
cable
.
Charging is initiated by holding a valid RFID card, which is registered in a back-
end system, close to the antenna of the RFID module. In offline operation, the
charge controller can optionally allow charging without authorization or it
can authorize users based on RFID and a local white list of authorized RFID
cards.