Safety instructions
6
RCMB103_D00044_00_M_XXEN/08.2013
1.4 Warranty and liability
Bender devices are designed and built in accordance with the state of the art and accepted rules in
respect of technical safety. However, the use of such devices may introduce risks to the life and limb
of the user or third parties and/or result in damage to Bender devices or other property.
Only use Bender equipment:
As intended
In perfect working order
In compliance with the accident prevention regulations and guidelines applicable at the loca-
tion of use
Eliminate all faults immediately which may endanger safety. Do not make any unauthorised changes
and only use replacement parts and optional accessories purchased from or recommended by the
manufacturer of the equipment. Failure to observe this requirement can result in fire, electric shock
and injury.
Although great care has been taken in the drafting of this operating manual, it may nevertheless
contain errors and mistakes. The Bender Group cannot accept any liability for injury to persons or
damage to property resulting from errors or mistakes in this manual.
1.5 Personnel
Only appropriately qualified personnel may work on the Bender product.
Qualified means familiar with the installation, commissioning and operation of the product and with
training appropriate to the work. Personnel must have read and understood the safety section and
warning information in this operating manual.
1.6 Work activities on electrical installations
Compliance with applicable regulations governing work on electrical installations, and with the
regulations derived from and associated with them, is mandatory. EN 50110 is of particular
importance in this regard.
If the device is being used in a location outside the Federal Republic of Germany, the applicable
local standards and regulations must be complied with. European standard EN 50110 can be
used as a guide.
Risk of electric shock!
Failure to carry out work on electrical installations properly and correctly
can
put life and limb at risk
and may damage the device!
Only
skilled persons
are permitted to carry out the work necessary to install,
commission and run a device or system.
