Settings
Settings
isoNAV685-D-B_D00264_03_M_XXEN/06.2017
33
Refer to
10.1
(1.8.5) Buzzer
The following parameters can be set for the buzzer:
10.1
(1.8.5.1) TEST
The functional test of the buzzer can be activated or deactivated. This only applies to the
manual test and not to the cyclic device self test:
10.1
(1.8.5.2) Function 1
Refer to
.
10.1
(1.8.5.3) Function 2
Refer to
.
10.1
(1.8.5.4) Function 3
Refer to
.
10.1
(2.0) Data measured values
The ISOMETER® stores certain measured values for a specific period of time. You can view
these data at the "Data meas. values" menu point. Navigate through the different views
using the and buttons:
10.1
(3.0) Control
In the control menu, you can start a manual test reset, reset alarm messages and start an
initial measurement:
•on
The manual test activates the buzzer sound.
•off
The manual test does not activate the buzzer sound.
•Insulation data
Display the insulation resistance of the three coupling paths L1, L2,
L3
•TEST
Manual device test
•RESET
Reset of fault and alarm messages
10.1
(4.0) History
In the history menu, the faults detected by the ISOMETER® are displayed. For a detailed
functional description, refer to
10.1
(5.0) Device settings
The device settings menu allows you to configure the basic settings for the ISOMETER®.
10.1
(5.1) Language
Choose the language to be displayed by the ISOMETER®. For example, you can set the lan-
guages:
10.1
(5.2) Clock
In the clock menu you can set the display format of time and date for the ISOMETER®:
10.1
(5.2.1) Time
Based on the selected time format you can set the current time to display 24-hour or 12-
hour notation (am/pm).
10.1
(5.2.2) Format (time)
Select the appropriate time format to be displayed:
•History
Overview of faults that have occurred
•Delete
Reset the history memory
•German
•English
•12 h
12-hour notation am/pm
•24 h
24-hour notation
