Bender FTC470XMB, Руководство по эксплуатации

Страница: 78 / 100

Programming examples mode 2
78 TGH1367en/06.2010
8.1.2 Alarm messages or information via channel number
The Modbus RTU Master interrogates BMS address 5, the 107TD47 insulation monitoring de-
vice, for information about the overtemperature (alarm message). This message is available
at channel 3 of the 107TD47.
The Modbus RTU Master sends an appropriate command to FTC470XMB
(function 16, output data):
The addressed 107TD47 signals overtemperature of the monitored isolating transformer
(function 3, input data)
:
The Modbus RTU Master interrogates BMS address 10, a PRC487 control device, for informa-
tion about the state of Line 1 (alarm message). This information is available at channel 1 of
PRC487.
The Modbus RTU Master sends an appropriate command to FTC470XMB
(function 16, output data):
The addressed PRC487 signals failure of Line 1 (function 3, input data).
Word 1 Word 2 Word 3 Word 4 Word 5
H-Byte L-Byte H-Byte L-Byte H-Byte L-Byte H-Byte L-Byte H-Byte L-Byte
always
„0“
Consecutive
Modbus ID
No.
BMS address of
the addressed
device
BMS
channel
No.
always
„0“
BMS
com-
mand
always
„0“
BMS
data
type
BMS data value
0 3 5 3 0 2 0 0 0
Word 1 Word 2 Word 3 Word 4 Word 5
0 3 5 3 0 2 0 11 3
Word 1 Word 2 Word 3 Word 4 Word 5
H-Byte L-Byte H-Byte L-Byte H-Byte L-Byte H-Byte L-Byte H-Byte L-Byte
always
„0“
Consecutive
Modbus ID
No.
BMS address of
the addressed
device
BMS
channel
No.
always
„0“
BMS
com-
mand
always
„0“
BMS
data
type
BMS data value
0 4 10 1 0 2 0 0 0
Word 1 Word 2 Word 3 Word 4 Word 5
0 4 10 1 0 2 0 11 4