Bender EDS460-DG, Руководство по эксплуатации

Страница: 53 / 76

Operation
53 TGH1429en/10.2008
6.4.4 Menu 4: Control
This menu offers various options for controlling the EDS:
6.4.4.1 Control menu 1: TEST
Call up a test (see also "Carrying out a test" on page 34). To prevent this
function being carried out inadvertently, the operator must once again
confirm this entry.
6.4.4.2 Control menu 2: RESET
Call up a reset (see also "Resetting saved alarm messages (RESET)" on
page 35). To prevent this function being carried out inadvertently, the
operator must once again confirm this entry.
6.4.4.3 Control menu 3: Test communication
This function enables you to test communication between the EDS460-
DG and other BMS equipment. To do this, the EDS460-DG sends an
alarm message via the BMS bus until the "Test communication" function
is exited. A connected evaluation device (IRDH575, MK800, MK2430,
FTC470...) must process this alarm. Select a channel for this alarm mes-
sage.
Exit Exit settings
1.TEST Call up a test
2.RESET Initiate a reset (see "Resetting saved alarm mes-
sages (RESET)" on page 35")
3.Test
communication Test communication between the EDS460-DG
and other BMS equipment.