Air supply and connection hazards:
•
Air under pressure can cause several injury !
•
Always shut off air supply, drain hose of air pressure and disconnect tool from air
supply, when not in use, before changing accessories or maintenance.
•
Never put direct air at yourself or anyone else.
•
Whipping hoses can cause serious injury. Always check for damaged or loose
hoses and fittings.
•
Do not exceed maximum air pressure according on the name plate respectively
6.3 bar.
•
Do not use quick disconnect couplings directly at the tool. See instructions for
correct set-up !
For additional safety information consult:
•
Your employer, union and/or trade association.
•
Council of the European communities and/or local codes
•
,,Safety requirements for hand-held non-electric Power Tools", available from:
European committee for standardization, Rue de Stassart 36. 1050 BRÜSSEL,
BELGIEN.
http://www.cen.eu/cenorm/homepage.htm
Maintenance:
•
Damaged or worn out parts should be replaced only by licensed original parts.
Get in contact with your dealer or a authorized service station for support. Using
unlicensed parts male functions could occur followed by possible hurts of health.
•
Check the tool regularly to recognize cracks, unusual clearance, mismatch and to
check the rotary parts for proper operation..
•
Recognizing a abnormality the unit needs to be provided to a authorized service
station before using it again. Please consider that many accidents are cause by
insufficient maintenance.
Tool applications:
•
Pulse spray pneumatic cleaning gun:
To clean automobiles
