4
Ver. 2004-01
5.
Push the release lever of the tool forward in the
direction of the arrow and push the magnetic adapter
(E) flush to the retaining plate.
6.
Position the retaining plate between the brake piston
and the saddle frame.
7. Thread the pins of the pin adapter into the recesses
of the brake piston and clamp the reset between the
brake piston and the saddle frame by lifting
movements on the lifting calliper (A) until the feed
spring (H) is also tensioned.
8.
Attach a ¼ “ratchet, a ¼“ lever or a ¼ “multi handle of
your choice to the rear of the ¼“ extension (F).
9.
Turn the ¼ “extension (F) clockwise or
counterclockwise, depending on the direction of
rotation of the brake piston.
10. While turning, the feed spring (H) pushes the brake
piston back and thus resets it.
11.
By pressing the trigger, you relax the reset and can
carefully remove it from the brake caliper.
