Bend-Tech Dragon A400, Инструкция по сборке

Страница: 33 / 44

33
Bend-Tech Dragon A400
Assembly Manual
Mounting to the Floor
05
05
Mounting to the Floor
5.1 Mounting Overview
To maintain long-term precision of the Dragon A400, Bend-Tech recommends mounting the
machine to the floor of the shop. A machine not securely mounted to the floor can result in
inconsistent operation.
5.2 Concrete Sleeve Anchors
Bend-Tech requires using ⅜ in. diameter, 3 in. long concrete sleeve anchors when mounting
the Dragon A400 to the floor. Installing the concrete sleeve anchors will require a 7/16 in.
concrete drill bit. One concrete sleeve anchor per Floor Bracket is sufficient for anchoring the
Dragon A400. Installing concrete sleeve anchors requires the use of a hammer drill.
Tools Needed
• 7/16 in. Concrete Bit
• 3 in. long, 3/8 in. concrete anchor
sleeves (14)
• Hammer Drill
• Hammer
•
1/2 in. Socket
• Torque Wrench
• Shop Vac or Compressed Air