31
10.6.3 COMPLETION
On completion of the combustion analysis check
and/or any gas valve adjustment, set the HTG
trimmer to the corresponding value as detailed in
the fan speed table. Refit the 3-selector knobs and
move the mode selector to the OFF position.
Remove the test probe from the test point and refit.
IMPORTANT
A GAS SOUNDNESS CHECK MUST BE CAR-
RIED OUT IF ANY GAS CARRYING COMPO-
NENTS HAVE BEEN REMOVED, REPLACED,
OR DISTURBED.
FAN SPEED (rpm) TABLE - LPG
MODEL
MAX
MIN
HTG
IGN
28HE
6100
1700
4300
3700
32HE
5900
1500
4500
3700
36HE
6300
1400
5200
3700
10.7
APPLIANCE FAN SPEEDS
The appliance fan speeds require to be checked
and/or adjusted prior to making any adjustments
to the gas valve or if the main PCB has been
replaced.
ATTENTION
Gas type and appliance fan speed (output)
must
be set
according to the specific appliance speci-
fication. The manufacturer accepts no
responsibility if the gas type and/or fan speed is
not correctly adjusted according to the respective
appliance specification as detailed on the
appliance data badge.
10.7.1 CHECKING/ADJUSTING THE APPLIANCE FAN
SPEEDS
Move the selector switch to the OFF position and
remove the 3-selector knobs.
10.7.2 ABSOLUTE MAX FAN SPEED
Locate the MAX trimmer (fig. 36) and gently adjust
clockwise or counter clockwise to achieve the
correct fan speed (see table above).
NOTE
: the display shows the fan RPM in multiples
of 1000, i.e. 2.5 = 2500RPM.
10.7.3 ABSOLUTE MIN FAN SPEED
Locate the MIN trimmer (fig. 36) and gently adjust
clockwise or counter clockwise to achieve the
correct fan speed (see table above).
NOTE
: the display shows the fan RPM in multi-
ples of 1000, i.e. 2.5 = 2500RPM.
10.7.4 IGNITION FAN SPEED
Locate the IGN trimmer (fig. 36) and gently adjust
clockwise or counter clockwise to achieve the
correct fan speed (see table above).
NOTE
: the display shows the fan RPM in multi-
ples of 1000, i.e. 2.5 = 2500RPM.
10.7.5 HEATING FAN SPEED
Locate the HTG trimmer (fig. 36) and gently ad-
just clockwise or counter clockwise to achieve
the correct fan speed (see table above).
NOTE
: the display shows the fan RPM in multi-
ples of 1000, i.e. 2.5 = 2500RPM.
