Benchmark Orbi-Shaker CO2, Руководство по эксплуатации

Страница: 8 / 13

▷
Time setting change
ⓐ TOUCH the time value, The numbers become red
ⓑ “SET MODE” is displayed (flashes)
ⓒ Input the desired value by pressing UP( ▲ )/DOWN( ▼ ) buttons
NOTE: Press and hold the buttons to increase or decrease the value
quickly.
ⓓ Apply: To store the newly set value TOUCH
(Or wait 5 seconds for the value to store automatically)
ⓔ Exit: If you press after changing any values, the values are not
saved and the screen returns to the previous screen
NOTE: The time cannot be adjusted during a run. To change the time
during a run, you must TOUCH . Change the time value and
press and
3.1.2. Advanced View Screen
▶ Advanced Mode
To switch from the standard BASIC view
To the ADVANCED view,
TOUCH “MENU” and choose ADVANCED View.
NOTE:
To return to the BASIC View, TOUCH
“MENU” and choose the BASIC View.
The ADVANCED View provides the user with access to the
STEP mode for linking consecutive mixing cycles.
BASIC to ADVANCED ADVANCED to BASIC
▶
Shaker setting (Advanced)
▷ RPM setting change
ⓐ TOUCH the RPM Shaker value, the screen turns to the
Shaker setting screen
ⓑ TOUCH the “RPM Set” Value to adjust the set speed.
ⓒ Input the desired value by using the key pads in
the setup screen
ⓓ Apply: When you press , the changed
setting values are saved and the screen turns to
the previous screen
ⓔ Exit: If you press button, the changed setting
values are not saved and the screen turns to the
previous screen
ⓕ The RPM setting range is 30~300rpm
When entering a value out of this range and
pressing , the message
“Incorrect range” is displayed.
ⓐ
ⓑ
ⓒ
ⓓ ⓔ
ⓕ
ⓐ
ⓑ
ⓒ ⓓ ⓔ