Benchmark HCM400 Скачать руководство пользователя страница 6

5

SYMBOL

MEANING

KEEP VISITORS AND CHILDREN AWAY

Keep unauthorized persons away from the mixer. Do not 

allow children to handle or climb on or in the mixer.

DO NOT OVERREACH

Keep proper footing and balance at all times when loading 

or unloading the mixer. Never stand on mixer. Serious injury 

could occur if the mixer is tipped or if the moving parts are 

unintentionally contacted. Do not store anything above or 

near the mixer where anyone might stand on the mixer to 

reach them.

AVOID INJURY FROM UNEXPECTED ACCIDENT

Keep hands out of the way of all moving parts. Do not place 

any part of your body or any tool, like shovel in the drum 

during operation.
When operating, do not pass hands through the clearance 

between frame and support arm or the one between the 

drum and support arm.

DON'T FORCE TOOL

It will do a better and safer job at its designed rate. 

Never try to split logs larger than those indicated in the 

specifications table. This could be dangerous and may 

damage the machine. Don't use log splitter for a purpose for 

which it was not intended.

NEVER LEAVE TOOL RUNNING UNATTENDED

Don't leave tool until it has come to a complete stop.

DISCONNECT POWER

Never open the motor cover before unplugging the mixer. 

Disconnect from power supply when not in use, before 

moving, making adjustments, changing parts, cleaning,  

or working on the mixer.  

Consult technical manual before servicing.

MAINTAIN YOUR MIXER WITH CARE

Clean the mixer immediately after use. Keep the mixer clean 

for best and safest performance. When maintaining this 

mixer, only the manufacturer’s original replacement parts 

may be used.

Содержание HCM400





















Отзывы: