CLEANING THE MACHINE
1.
At the end of day
: Turn the machine off using the master switch. Remove any
remaining hotdogs from the grill.
2.
Turn on the rollers and set the thermostats to “OFF” setting. The rollers will now be
rotating without any heat being applied.
3.
Apply slight pressure to the rollers with a clean, damp cloth as the rollers rotate. (
Note
:
do not use any abrasive materials as it could scratch the polished rollers
). Slide the
cloth back and forth across each of the rollers until all of the surfaces have been cleaned.
4.
Remove the drip tray below the rollers and in a sink clean it thoroughly using a mild
detergent and water.
5.
Wipe down the remaining surfaces of the grill with a clean, damp cloth. Do not get any
water on the control panel as the electricals could become damaged by water.
6.
After the components have been cleaned, re-assemble the machine as outlined above.
ASSEMBLY
Page 3
