manualshive.com logo in svg

Benchmark 5554-514, Руководство пользователя

Поделиться
Скачать
Benchmark 5554-514 Скачать руководство пользователя страница 18

17

To obtain the best life from the battery
NOTE:

1.  Never allow the battery to completely discharge before recharging. The battery 

pack should be placed on the charger whenever the battery pack is noticeably 

running down or the tool no longer performs a task as it previously performed.

2.  Avoid conducting short charges. Make sure that the battery is fully charged  

each time by allowing the charger to complete its full charging cycle. 

3.  Avoid allowing loose items like screws or nails etc. to be stored with battery  

packs as these or similar items can short battery packs’ life and cause a fire  

or explosion. 

4. Always unplug the charger when not in use and store in a dry and secure place.
5.  Avoid charging or storing your battery in temperatures below 5°C and above 45°C.
6.  After use, allow the battery pack to cool down for approximately 30 minutes 

before attempting to recharge.

STARTING AND STOPPING

1.  Open the battery housing cover and slide battery down until it clicks to lock it into 

position, then close the battery housing cover (Fig.19).

POWERING ON AND OFF

1.  To power on, depress and hold the safety switch button found alongside the 

switch housing (Fig. 20).

Battery

Fig. 19

Fig. 21

Fig. 20

Содержание 5554-514



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды