BSH6000 Operation manual
Chapter 4 Operation Guide
5
Chapter 4 Operation
1. Temperature and time setting
a) Press the On/Off switch to power on the
instrument. The instrument performs a self
test followed by an alarm to signal that the
product is ready for use.
b) After about 3 seconds, the temperature will
automatically increase to the most recent
setting. The values shown on the display
are actual settings (real time temperature and
time remaining.) The example shows an
actual temperature of 28.5°C and 35 minutes
remaining.
c) To adjust the set temperature, press or
keys until the desired temperature (Ex. 55.5) is
showing on the display. After 5 seconds, this
temperature is stored and the instrumnent will
begin heating.
d)
To
set
t
he
t
i
me,
Pr
ess
t
he
“
Mode
”
key,
t
he
displayed time begins flashing, press or
keys to set the desired time (ex 1 hour and 20
minutes). After 5 seconds the desired time is
stored.
NOTE: The timer will not begin unless the
“St
ar
t
/
St
op”
but
t
on
has
been
pr
essed
DOMINIQUE DUTSCHER SAS
All manuals and user guides at all-guides.com
