15
Error Code and Troubleshooting Guide:
Error Number Description
01
Generic RS485 Communication Error
02
USB Communication Error
03
Out of Tickets
04
Ticket Dispenser Communication Error
21
Stepper Controller
22
LED Bar
23
Bonus Display
24
Credit Display
25
Score Sensor
26
Home Sensor
27
Ball Count
E-1: General RS485 Communication Error
This error occurs when the 485-communication chain has been disrupted.
Troubleshooting:
Check the 485 plugs coming out of the Main board.
1.
Check that there are no cold solder joints.
2.
Plug is not missing.
3.
Check that the Blue and Gray wires are connected and seated properly.
Check continuity on the Blue and Gray wires.
1.
Set their volt meter to Ohms
Ω
.
2.
Place prongs on both ends of one gray wire. You should have some resistance.
3.
Repeat step 2 for blue wire.
Check continuity between the blue and gray wires.
1.
Set their volt meter to Ohms
Ω
.
2.
Place one prong on a Blue end and the other on a Gray. You should have 0 Ohms
Ω
.
E-2: USB Communication Error
This error occurs when the USB signal has been disrupted.
Troubleshooting:
Check the wire for any damage.
1.
Pinched at turning points.
2.
Damage at plug end.
3.
Frayed wires.
Check Board for damaged port.
