Benchmark Games Tickets To Prizes, Руководство пользователя

Страница: 8 / 24

7.) “CLEAR TICKETS OWED?”
This option is displayed if there are tickets that are owed that have not been dispensed, and
will show the number of tickets. Depressing Button 1 will clear these tickets from the system,
and “TICKETS CLEARED” will be displayed. Depressing Button 2 will display “ENTER
PROGRAM MODE?”
8.) “ENTER PROGRAM MODE?”
Depressing Button 1 at this time will enter the area of Program Mode where parameters may
be changed, and “ENTER PASSCODE” will be displayed. Depressing Button 2 will return
the Tickets-To-Prizes to Normal Run Mode.
9.) “ENTER PASSCODE”
To be able to change programming parameters or reset the counters, a 4-digit passcode must
be entered. The default passcode is 0000. To enter the passcode, Depress Button 1 to change
the digit from 0 to 9, then press Button 2 to move to the next digit. After all digits have been
entered correctly, depressing button 2 will Display the first programming option, “CHANGE
PASSCODE?”.
10.) “CHANGE PASSCODE?”
Depressing Button 1 will allow for changing the passcode. Depressing Button 2 will move to
“DISPLAY CONTRAST”.
IMPORTANT!!! ONCE THE PASSCODE IS CHANGED, THE DEFAULT OF 0000
WILL NO LONGER WORK! BE SURE TO SAVE THE PASSCODE IN A SAFE
PLACE!
Entering the new passcode is accomplished in the same way that entering the passcode is
done, as explained in
9.) .
8.) DISPLAY CONTRAST
This option sets the contrast for the LCD Display. Depress and hold Button 1 until the desired
contrast is reached, then release Button 1. Depressing Button 2 will move to the next option,
“VOLUME”.
9.) VOLUME
This option sets the speaker volume for the audio prompts. When this option is entered, the
audio voice will play continuously. Depressing Button 1 will increase/decrease the volume.
As long as Button 1 is depressed, the volume will increase until the maximum is reached,
then decrease until the volume is off. Depress and hold Button 1 until the desired volume is
reached. If the volume is increasing and Button 1 is released, then depressing Button 1 again
will cause the volume to decrease. The opposite will happen if the volume is decreasing.
Depressing Button 2 will display the next option, “ATTRACTION FREQUENCY”.
10.) ATTRACTION FREQUENCY
This option sets the frequency at which the attraction mode occurs. The attraction mode
causes the trees to rotate for approximately 1 minute. The settings are from OFF to every 30
minutes. Depressing Button 1 will change the settings in 1-minute increments from OFF to 30
minutes, then back to OFF. Depressing Button 2 displays the next option, “VEND
RETRIES”.
13.) VEND RETRIES
This option sets the number of vend attempts allowed. If the number of attempted vends
allowed without a successful vend exceeds this setting, then the Ticket Count is set to 0. The
7