3
BALL HOLES
LOCKS
GLASS
GOLDZONE SETUP
1. REMOVE GAME FROM BOX.
2. OPEN WOOD DOOR AND REMOVE CASHBOX. REMOVE THE POWER
PLUG, SPINNER ASSEMBLY AND THE PLATTER BALLS,(7/16" METAL BALLS).
3. REMOVE THE GLASS BY UNLOCKING THE LOCK AT THE TOP CORNERS OF THE GLASS
AND PULLING THE GLASS OUT,(NOTE: THE COIN MECH WILL BECOME UNPLUGGED).
4. INSTALL THE 3 WHEELED HUB ONTO THE CENTER SHAFT OF THE ROTATING
PLATTER, THEN INSTALL THE ALUMINUM SPINDLES ON TOP OF THE HUBS.
5. INSTALL THE PLATTER BALLS INTO THE HOLES ON THE PLATTER.
6. TURN GAME ON AND SLOWLY START PUTTING COINS ONTO THE PLAYFIELD TO
SEED THE GAME. KEEP PUTTING ON COINS UNTIL COINS ARE FALLING OFF THE
PLAYFIELD ALL AROUND THE PLATTER,(THE PLATTER IS NOW FULLY SEEDED).
7. REASSEMBLE THE GLASS ON ALL ,(MAKING SURE YOU PLUG IN THE COIN
MECHS WHILE INSTALLING THE GLASS).
8. USING THE POWER PLUG, PLUG IN THE GAME ON THE RIGHT SIDE OF THE GAME ON
THE OUTSIDE AND TURN POWER SWITCH ON,(LOCATED WHERE THE PLUG GOES
INTO THE CABINET}.
Содержание GOLDZONE
Страница 1: ......