Bench Dogs Rail Square, Инструкция по эксплуатации, Страница: 5 / 6

Screw either the 30mm Bevel Adapters
or the 60mm adapters – depending
on the thickness of the board you are
cutting – into the holes as shown.
Place the square/rail over the bevelled
edge of your work piece to enable you
get maximum stability to make the cuts
you require.
With either of the grooved adapters in
place you can use our b-collars to adjust
the height of the square to fit perfectly
with the thickness of your work piece,
simply tighten the grub screws (circled)
using the commonly spaced grooves to
fix in place.
STEP 1 STEP 2 STEP 1
Instructions for using the b-collars Instructions for bevel-edged cuts
CONTACT@BENCHDOGS.CO.UK WWW.BENCHDOGS.CO.UK Q E M
FOR MORE INFORMATION PLEASE VISIT