Benassi F 1900, Руководство по эксплуатации и обслуживанию

Страница: 10 / 14

F1900
38
STARTING AND STOPPING THE MACHINE
•
Every time you get ready to start the motor, make a careful check of the following:
•
Make sure that fuel is in the tank.
•
Check the motor oil level: CAUTION: MACHINES OUT OF THE FACTORY DO NOT CONTAIN OIL IN
THE MOTOR. Make sure to add oil up to the level on the dipstick.
•
CONSULT THE OPERATION AND MAINTENANCE MANUAL OF THE MOTOR UNDER "BEFORE
START-UP"
•
Make sure oil is up to the level in the gearbox (Pict. 4 Ref. “A”)
•
Check that all safety systems are released and functioning, especially the levers (Pict. 5 Ref. “C” and “B”)
•
Always start the motor up outdoors.
•
Bring the accelerator hand lever (Pict. 5 Ref. "A”) to the "START" position, grasp the cord handle (Pict. 6)
and pull it slightly until you feel some resistance, then pull harder. Make sure that the cord does not return
by itself -- accompany it with your hand.
•
For best start-up, read the operation and maintenance manual on the motor under "START-UP".
•
With the motor running, bring the accelerator lever (Pict. 5) to the middle position.
•
To make the machine go forward squeeze the clutch lever (Pict. 5 Ref. “B”). Release it slowly and the
machine will start operating, keeping the "MOTOR STOP" lever pressed.
•
In order to engage the bar, press the security button with the thumb (Pict. 5 Ref. “H”) and with the palm of
the hand let the bar clutch lever down (Pict. 5 Ref. “C”) keeping it pressed on the handle.
•
To move the mower freely forward or back, squeeze the wheel release lever (Pict. 5 Ref. “B”) after
squeezing the clutch lever (Pict. 5 Ref. “D”).
•
To switch off the engine, move the accelerator lever (Pict. 5 Ref. A) to the "STOP" position.
•
The main function of the lever (Pict. 5 Ref. "E") is to turn off the motor when releasing your hands from the
steering handles. Do not ever tie the "MOTOR STOP" lever ("E") to the handlebar knob.
•
Every time you get ready to start the motor, check that the button (Pict. 5 Ref. “F”) is pressed, keeping both
the "MOTOR STOP" lever and the clutch lever blocked.
•
Before you start to mow, check that the motor shuts off with the "STOP" lever raised.
MOTOR STOP: lever "e" is squeezed; MOTOR START : lever "e" is lowered
•
To stop the advancement, release the lever (Pict. 5 Ref "B").
•
To stop the mowing bar, release the lever (Pict. 5 Ref "C").
•
Caution! Do not non operate the wheel engage lever (Pict. 5 Ref. "B") and the wheel release lever (Pict. 5
Ref. "D") at the same time.