Benassi 8606935, Руководство пользователя

Страница: 14 / 26

BL301
13
7. MAINTENANCE
•
For the normal maintenance check the booklet for the engine included.
•
The chain for the final transmission is lubricated with standard grease.
Every year you should introduce some grease through the hole (Pict. 19) in the main body
•
Keep the machine and the tillers clean and check that all the screws and nuts are well tied, especially the
screws of the tiller (always wear protection gloves working on the tiller).
•
In case of breaking or wear you can replace the belt after taking off the side protection cover fixed to the
frame near the engine shaft by two screws .
•
In order to remove the belt of the reverse gear, it is necessary to remove the small cover by unscrewing its
screw. Remove the belt from the pulleys, install the new belt end adjust it following the instructions
mentioned in the chapter USE AND ADJUSTMENT by checking the distance between both sides of the
belt, then replace the cover.
•
The pin fixing the big pulley has also a safety purpose: in case heavy obstacle it will break avoiding
damages to other parts of the machine.
•
The replacement of the pin is very easy: you have to insert the new pin in the hole using a hammer.
•
For any technical repair especially during the guarantee period, it is recommendable to apply to the
specialized workshops of our dealers.
CAUTION
It is advised not to keep the motor running when the machine is not being used for its specific purpose